G4x AtomX

LINKG4XATOMX

AtomX

Small, but mighty!  

The Link G4X AtomX ECU is the latest version of our entry-level ECU.

The AtomX can control up to 2 rotors or 4 cylinders with sequential injection and direct spark. Or, it can be used for up to eight cylinders using batch fire. Now featuring Knock Control.

Ideal for naturally aspirated engines that just need a re-tune and don't need all the extra sensors and features that come with our higher level ECUs. 

€860.00
Quantity
Last items in stock

Description

AtomX

Small, but mighty!  

The Link G4X AtomX ECU is the latest version of our entry-level ECU. Don't let its size fool you however, the AtomX has expanded data logging and uses the same microcontroller as the entire G4X range! It is more responsive and has higher bandwidth than its G4+ Atom II predecessor. 

G4X features 512 megabytes of logging at 32bit using up to 250 channels, each limited to up to 1kHz per channel (by the Operating System), with a maximum of 100 kSamples/sec.

G4X features 8 x faster communications speed, allowing you to download logs 8 x faster and pushes all the logging quickly up to a new and improved PCLink – available for download below in the features tab. 

The AtomX can control up to 2 rotors or 4 cylinders with sequential injection and direct spark. Or, it can be used for up to eight cylinders using batch fire. Now featuring Knock Control.

This makes it ideal for naturally aspirated engines that just need a re-tune and don't need all the extra sensors and features that come with our higher level ECUs. 

The AtomX is ideal for: 

  • 1-12 Cylinder Distributed
  • 2-8 Cylinder Wasted Spark
  • 1-4 Cylinder Direct Spark
  • Odd Fire Engines
  • 2-Stroke Engines
  • Configurable Firing Order
  • Configurable TDC Points (for odd fire)

SPECS

Inputs:

  • 2 x Digital inputs
  • 2 x Temperature inputs
  • 3 x Analog inputs
  • 2 x Trigger inputs
  • 1 x Knock Input

Outputs:

  • 4 x Injector drives
  • 4 x Ignition drivers
  • 4 x Auxiliary outputs^
  • +5V Sensor power supply
  • ^unused ignition drives can be used as additional Aux
  • outputs

Communications:

  • 1x CAN bus
  • 1x USB tuning connection
  • 1 x thirty four pin, waterproof connector
  • Upgraded Communications Chip

 

Misc: 

  • Comes loaded with all of Link ECU's standard features.
  • 512MB of logging memory
  • 20 general purpose tables
  • Runs on PC Link software for G4X

Physical:

  • Dimensions: 90mmL x 130mmW x 45mmH (without loom)
  • Weight: 180 grams

What's in the box:

The AtomX ECU is supplied with a USB tuning cable, mounting bracket and four Link ECU stickers.

Requires "A" loom

Product Details
LINKG4XATOMX
111-4000
You might also like

Reference: LINKG4XMONSOONX

Brand: Link Ecu

G4x MonsoonX

(0)

MonsooX More features, more powerful.  The Link G4X AtomX ECU is the latest version of our entry-level ECU. The AtomX can control up to 2 rotors or 4 cylinders with sequential injection and direct spark. Or, it can be used for up to eight cylinders using batch fire. Now featuring Knock Control. Ideal for naturally aspirated engines that just need a...

Price €1,160.00
More
Last items in stock

Reference: LINKAHARNESS_SHORT

Brand: Link Ecu

Link G4 Loom "A" Short

(0)

0.4m long 'A' loom to suit G4, G4+ and G4X Wire-In ECUs The ‘A’ Loom has a Link ‘A’ ECU connector at one end and unterminated wires at the other. All wires are colour coded to match the manual. This loom is also available in 2.5m and 5m lengths.

Price €86.00
More
available in 7 days!

Reference: LINKAHARNESS_MID

Brand: Link Ecu

Link G4 Loom "A" Medium

(0)

2.5m long 'A' loom to suit G4, G4+ and G4X Wire-In ECUs The ‘A’ Loom has a Link ‘A’ ECU connector at one end and unterminated wires at the other. All wires are colour coded to match the manual. This loom is also available in 40cm and 5m lengths.

Price €169.00
More
available in 7 days!

Reference: LINKAHARNESS_LONG

Brand: Link Ecu

Link G4 Loom "A" Long

(0)

5m long 'A' loom to suit G4, G4+ and G4X Wire-In ECUs The ‘A’ Loom has a Link ‘A’ ECU connector at one end and unterminated wires at the other. All wires are colour coded to match the manual. This loom is also available in 40cm and 2,5m lengths.

Price €199.00
More
available in 7 days!
13 other products in the same category:

Reference: LINKG4XSTORMX

Brand: Link Ecu

G4x StormX

(0)

G4X StormX Advanced tuning features at an affordable price. The Link G4X StormX ECU is the latest version of our trusty, mid-sized ECU. With eight injector and eight ignition drives, it allows sequential injection and direct spark on engines with up to eight cylinders or four rotors.  The StormX has all the upgrades of the AtomX and MonsoonX but offers...

Price €1,570.00
More
On request!

Reference: LINKACONNECTOR

Brand: Link Ecu

Link G4 "A" Connector

(0)

'A' connector to suit G4, G4+ and G4X Wire-In ECUs Link ‘A’ ECU connector

Price €42.00
More
available in 7 days!

Reference: LINKAHARNESS_SHORT

Brand: Link Ecu

Link G4 Loom "A" Short

(0)

0.4m long 'A' loom to suit G4, G4+ and G4X Wire-In ECUs The ‘A’ Loom has a Link ‘A’ ECU connector at one end and unterminated wires at the other. All wires are colour coded to match the manual. This loom is also available in 2.5m and 5m lengths.

Price €86.00
More
available in 7 days!

Reference: LINKBHARNESS_MID

Brand: Link Ecu

Link G4 Loom "B" Medium

(0)

2.5m long 'B' loom to suit G4, G4+ and G4X Wire-In ECUs The ‘B’ Loom has a Link ‘B’ ECU connector at one end and unterminated wires at the other. All wires are colour coded to match the manual. This loom is also available in 40cm and 5m lengths.

Price €169.00
More
available in 7 days!

Reference: LINKBHARNESS_SHORT

Brand: Link Ecu

Link G4 Loom "B" Short

(0)

0.4m long 'B' loom to suit G4, G4+ and G4X Wire-In ECUs The ‘B’ Loom has a Link ‘B’ ECU connector at one end and unterminated wires at the other. All wires are colour coded to match the manual. This loom is also available in 2.5m and 5m lengths.

Price €86.00
More
available in 7 days!

Reference: DSNATPSKIT

Brand: DsGarage

Miata NA 1.6 variable TPS kit

(0)

Plug and play throttle position sensor (vTPS) conversion kit for Mx5 Miata 115cv and euro 90cv Aftermarket ECUs use only

Price €89.00
More
Ready to ship!

Reference: LINKAHARNESS_LONG

Brand: Link Ecu

Link G4 Loom "A" Long

(0)

5m long 'A' loom to suit G4, G4+ and G4X Wire-In ECUs The ‘A’ Loom has a Link ‘A’ ECU connector at one end and unterminated wires at the other. All wires are colour coded to match the manual. This loom is also available in 40cm and 2,5m lengths.

Price €199.00
More
available in 7 days!

Reference: LINKAHARNESS_MID

Brand: Link Ecu

Link G4 Loom "A" Medium

(0)

2.5m long 'A' loom to suit G4, G4+ and G4X Wire-In ECUs The ‘A’ Loom has a Link ‘A’ ECU connector at one end and unterminated wires at the other. All wires are colour coded to match the manual. This loom is also available in 40cm and 5m lengths.

Price €169.00
More
available in 7 days!

Reference: LINKBHARNESS_LONG

Brand: Link Ecu

Link G4 Loom "B" Long

(0)

5m long 'B' loom to suit G4, G4+ and G4X Wire-In ECUs The ‘B’ Loom has a Link ‘B’ ECU connector at one end and unterminated wires at the other. All wires are colour coded to match the manual. This loom is also available in 40cm and 2,5m lengths.

Price €199.00
More
available in 7 days!

Reference: LINKG4XEXTREMEX

Brand: Link Ecu

G4x XtremeX

(0)

G4X XtremeX The XtremeX is one of Link’s premium ECU’s with more inputs, outputs and features. The XtremeX has built in E-throttle and all the advanced features including Anti-lag, Cruise Control and Traction Control. With 8 Injector drives and 8 ignition drives the XtremeX can control up to 4 rotors or 8 cylinders with sequential injection and direct...

Price €1,750.00
More
Last items in stock

Reference: LINKBCONNECTOR

Brand: Link Ecu

Link G4 "B" Connector

(0)

'B' connector to suit G4, G4+ and G4X Wire-In ECUs Link ‘B’ ECU connector

Price €42.00
More
available in 7 days!

Reference: LINKG4XMONSOONX

Brand: Link Ecu

G4x MonsoonX

(0)

MonsooX More features, more powerful.  The Link G4X AtomX ECU is the latest version of our entry-level ECU. The AtomX can control up to 2 rotors or 4 cylinders with sequential injection and direct spark. Or, it can be used for up to eight cylinders using batch fire. Now featuring Knock Control. Ideal for naturally aspirated engines that just need a...

Price €1,160.00
More
Last items in stock
chat Comments (0)
No customer reviews for the moment.

Follow us on Facebook